ADCP-50-404 • Issue 2 • November 19982-70000-0344 Page 1© 1998, ADC Telecommunications, Inc.DMPS-10CE Power SupplyUser ManualContent PageRevision Hist
ADCP-50-404 • Issue 2 • November 1998Page 2© 1998, ADC Telecommunications, Inc.1. GENERALThe DMPS-10CE Power Supply, as shown in Figure 1, is a rack m
ADCP-50-404 • Issue 2 • November 1998Page 3© 1998, ADC Telecommunications, Inc.3. DMPS-10EXP/CE EXPANSION MODULEThe DMPS-l0EXP/CE Expansion Module, as
ADCP-50-404 • Issue 2 • November 1998Page 4© 1998, ADC Telecommunications, Inc.Ripple voltage* is held to the following limits:+5 Vdc, at or below 50
ADCP-50-404 • Issue 2 • November 1998Page 5© 1998, ADC Telecommunications, Inc.5. OUTPUT CABLE ASSIGNMENTSOutput from the DMPS-l0CE Power Supply is de
ADCP-50-404 • Issue 2 • November 1998Page 6© 1998, ADC Telecommunications, Inc.7. DMPS-10EXP/CE EXPANSION MODULE INSTALLATIONRemove the DMPS-10EXP/CE
ADCP-50-404 • Issue 2 • November 1998Page 7© 1998, ADC Telecommunications, Inc.(e)Install the two screws removed in step (b) above to hold the expansi
ADCP-50-404 • Issue 2 • November 1998Page 8© 1998, ADC Telecommunications, Inc.CAT #S/NDATECODEMADEIN USAURMODELVOLTSHERTZDATE CODEAMPSOUTPUTVOLTSAMP
ADCP-50-404 • Issue 2 • November 1998Page 9Contents herein are current as of the date of publication. ADC reserves the right to change the contents wi
Comments to this Manuals