POWER MANAGEMENT SYSTEM DEVICE
©2012 Rev. 1.0 Page3
1. Outline
RC5T7315 is the Power management LSI that integrates Regulators, Battery Charger, and RTC in one chip.
2. Feature
■ Power Supplies
13 Linear Regulators
Five Voltage Detectors (DET1, DETIO, DET2, UVLO, and SHDET)
Reference Voltage Source
3ch Step-down DCDC Converters
■ Serial Interface
The interface circuit with CPU consists of 16-bit serial register (8-bit command and 8-bit address), the
address decoder, and the transmitting register (8 bits).
■ GPIO
THIS BLOCK IS COMPOSED OF 14 I/O PINS WITH PULL-UP/DOWN CONTROL FUNCTION.
THE INPUT SIGNALS TO GPIO PINS ARE OUTPUT TO INTC BLOCK, AND THEY BECOME ONE OF THE
INTERRUPT GENERATION FACTORS.
■ INTC Interrupt Controller (INTC)
INTC block detects the state change of external input signals (GPIO 14 bits) and the internal interrupt
signals, and then it generates interrupt signals.
■ 10bit ADC
10bit ADC has 8-channel input ports with a multiplexer.
■ Battery Charger
-There are two external power supply input pins; VCHG1 and VCH2.
-When both VCHG1 and VCHG2 pins have a proper input of voltage range;
the priority is given to VCHG1 pin input. Proper voltage range: 4.0V < V
VCHG 1(VCHG2)
< 6.3V
-The efficient power supply to the system and battery is performed by the current limit protection and the
charge current control.
-Various timers for the charge control are integrated.
-Chip temperature detection circuit is integrated, and it prevents the chip overheating due to the charge.
-Thermistor temperature monitoring circuit is integrated, and it stops charging at the detection of error
temperature while charging. Also, the temperature can be monitored by the integrated ADC.
-LED connection pin is equipped; the external LED can be turned on。
-Maximum allowable current from VBAT pin to VSYS pin: 1.6A.
-VCHG1 and VCHG2 pin: 7V withstand (absolute maximum ratings)
■ Reset Control
The Reset Control circuit generates the RESETB signal by the 7 factors.
■ Real Time Clock
- The time and calendar data are transferred to CPU through serial transfer.
- Integrates the periodic interrupt circuit with alarm function
(RTC interrupt request can be output to INTOUT pin through INTC block).
- All the registers of integrated RTC have their own backup in BKBAT (REGRTC: always ON).
■ Package
CSP0606-120 (0.5mm pitch, PKG thickness = 1mm@MAX)
■ Process
CMOS 0.18μm
Comments to this Manuals