ADC DL3XR-FCA100 User Manual download pdf (Page 28)

Setting Up System Options LTPS-UM-8013-03

20 August 30, 2002 D3LX CO and RMT Modules

• 9600 baud

• No parity

• 8 data bits

• 1 stop bit

• Hardware flow control to OFF

Figure 11. Connecting a Maintenance Terminal to the SCU

5 At the maintenance terminal, press . The Enter User Name field appears.

CONNECTING A MAINTENANCE TERMINAL TO THE D3RCAM CRAFT

ORT

1 Locate the D3RCAM in the remote cabinet. The D3RCAM craft port is located on the front of the D3RCAM.

2 Select the cable for use between the craft port and the maintenance terminal with a DB-9 (male) connector at

one end and a maintenance terminal connector at the other end.

3 Connect one end of the interface cable to the maintenance terminal and the other end to the D3RCAM craft

port as shown in Figure 12.

4 Start a terminal emulation program such as Procomm that emulates a VT100 terminal.

The default port configuration for the SCU craft port is CRAFT. Ports 2 and 3 must be configured

for CRAFT before the craft interface may be accessed via these ports.

Craft port

Maintenance

terminal

Serial

COM port

Interface cable

LEC

ENTER

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

No comments

ADC DL3XR-FCA100 User Manual Page 28