ADC Network Unit User Manual download pdf (Page 22)

Chapter 3: Provisioning August 7, 2006

3-4 AIWN-UM-7001-01

Configure Keep Alive

Purpose:

Configure “keep alive” mode. When on, the ENIU will not generate an alarm event if the subscriber interface loses

link. This allows the network side to remain unencumbered by interfaces changes that may occur on the subscriber

port from random changes in the subscribers network.

Command:[RW, SECURE privilege]

SET KEEP ALIVE ON|OFF

Status Commands: [all privileges]

GET CONFIGURATION

Configure Loopback Operation

Purpose:

Configure Loopback settings and timeout values. The ENIU provides an extension to IEEE 802.3ah loopback

operation by providing a timeout feature. When on, loopback operations will automatically end after the timeout

period has elapsed and return the ENIU to normal state of passing data. Timeout values are specified in minutes

ranging from 10 to 240 minutes or 0 to disable the timeout. The ENIU implements OAM and extended OAM

methods of loopback operation as well as manual operation through the command line and a push button.

Command:[RW, SECURE privilege]

SET LOOPBACK TIMEOUT <minutes>

SET LOOPBACK ON|OFF

Status Commands: [all privileges]

GET CONFIGURATION

GET LOOPBACK STATUS

Configure Error Forwarding Mode

Purpose:

Configure Error Forwarding mode to on/off. The ENIU provides the feature to forward the frames received with

errors to the other side for end to end testing. When on, frames received with errors are forwarded to the other side

and when set to off, the frames received with errors are discarded. The default is off.

Command:[RW, SECURE privilege]

SET ERROR FORWARDING ON/OFF

Status Commands: [all privileges]

GET CONFIGURATION

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

No comments

ADC Network Unit User Manual Page 22