ADC MM701G User Manual download pdf (Page 151)

Appendix B: Specifications

MM701G and MM702G User Manual 143

Connector Pinouts

The following sections provide the pinout information for the various modem connectors.

DSL Port (RJ-11)

The following table shows the signal on each pin of the DSL port for a 2-wire G.shdsl

application. The connector for this interface is an RJ-11. The modem accommodates Tip and

Ring reversal on this one loop. See “Connect Cables” on page 3 for the location of this port.

The following table shows the signal on each pin of the DSL port for a 4-wire G.shdsl

application. The connector for this interface is an RJ-11. The modem accommodates Tip and

Ring reversal on each separate Loop A and Loop B. See “Connect Cables” on page 3 for the

location of this port.

Pin Signal

1 Not used

2 No connection

3 Tip (Loop A)

4 Ring (Loop A)

5 No connection

6 Not used

Pin Signal

1 Not used

2 Tip (Loop B)

3 Tip (Loop A)

4 Ring (Loop A)

5 Ring (Loop B)

6 Not used

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 167 168

No comments

ADC MM701G User Manual Page 151