ADC MM701G User Manual download pdf (Page 28)

Configure DHCP Server Mode

20 MM701G and MM702G User Manual

• Enabled—The modem functions as a DHCP server and can serve IP addresses, a DHCP

gateway, and a DNS server IP address to devices on your LAN. When the modem

DHCP server is enabled, then LAN clients (such as PCs) must have their Internet

protocol (TCP/IP) set to

Obtain an IP address automatically (see page 19 for an example

of where to select this option).

a Select

Enabled, then click Configure to access the following DHCP Server page

(DHCP Server cannot be enabled when the LAN protocol is in bridge mode).

b Configure the following parameters when DHCP server is enabled for the modem:

DHCP Range Low

The lowest IP address value that the modem can serve when configured as a

DHCP Server. A maximum of 20 IP addresses can be served by the modem.

This IP address value is provided by your LAN administrator and must be on

the same subnet as the modem LAN port.

DHCP Range High

The highest IP address value that the modem can serve when configured as a

DHCP Server. A maximum of 20 IP addresses can be served by the modem.

This IP address value is provided by your LAN administrator and must be on

the same subnet as the modem LAN port.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 167 168

No comments

ADC MM701G User Manual Page 28