ADC MM701G User Manual download pdf (Page 52)

Setting Up the WAN

46 MM701G User Manual

2 Select a session by typing the session number at the Select session for editing prompt to

display the

WAN Session Options screen.

3 Type

10 to select the VPI parameter, then enter the values supplied by your service

provider.

4 Type

11 to select the VCI parameters, then enter the values supplied by your service

provider.

5 If you are operating in Router mode, you also need to enter the WAN ADSL Port ID

address and the associated WAN IP subnet mask. Both of these values are provided by your

service provider.

6 Select

Apply to activate your changes. Apply immediately activates the changes that you have

made for this session.

7 Select Save New System configuration from the Main Menu as described in “Saving the

Current Configuration” on page 60 or the changes will be lost upon reboot or power cycle.

Session Parameters

1. Session Name Bridge 10. VPI 0

2. WAN Protocol RFC1483 Bridge 11. VCI 35

3. State Enabled 12. QOS UBR

4. IP Addressing N/A 13. QOS Peak Cell Rate

5. IP Address N/A 14. Encapsulation LLC

6. IP Net Mask N/A 15. Login Name N/A

7. NAT N/A 16. Login Password N/A

8. RIP Send N/A 17. Authentication N/A

9. RIP Accept N/A 18. Apply

Select parameter to edit (Return to exit) ->

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 107 108

No comments

ADC MM701G User Manual Page 52