ADC MM701G User Manual download pdf (Page 54)

Setting Up the WAN

48 MM701G User Manual

SETTING UPTHELAN

If you are operating in Router mode and in a LAN environment, then you also need to set your

LAN protocol, Ethernet Port IP address, and subnet mask.

If you prefer, you may use the default values of 10.0.0.1 for the Ethernet Port IP Address, and

255.255.255.0 for the subnet mask.

1 From the

Main Menu, select LAN Setup. The LAN setup screen displays.

2 Select

LAN Protocol by typing 1 from the LAN Setup menu.

3 Do one of the following from the LAN Mode menu:

• Select

Router by typing 1.

• Select Bridge by typing 2. You must configure an IP address for the LAN port to use a

Browser or Telnet to manage the MM701G.

4 Select IP Address and IP Net Mask by typing 2 and 3 (respectively), then enter the values

supplied by your LAN administrator or use the default values.

5 Select Default Gateway by typing 4 from LAN Setup menu, then enter the Default Gateway IP

address supplied by your access provider.

6 Select

Apply by typing 10 to activate your settings. Apply immediately activates the changes

that you have made for this session.

7 From the Main Menu select Save New System Configuration to save these settings.

LAN

1. LAN Protocol Bridge

2. IP address 10.0.0.1

3. IP Net Mask 255.255.255.0

4. Default Gateway

5. DHCP None

6. DHCP Range Low Address N/A

7. DHCP Range High Address N/A

8. DHCP Gateway Address N/A

9. DHCP DNS N/A

10. Apply

Select Parameter to edit (Return to exit) ->

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 107 108

No comments

ADC MM701G User Manual Page 54